Knowledgebase: Domains & DNS
Set Up Nameservers at Registrar
Posted by H9 Admin on 07 November 2014 12:56 PM

In order for people to find your website, you will need to configure DNS and set nameservers. You can either use our nameservers, or you can use third-party name servers. Either way, you would need to configure them so your domain works with your HostNine web hosting account.

DNS is an acronym for Domain Name Server, and is the system used to translate word-based addresses of systems (like '') to the numerical IP (Internet Protocol) address of the computer or system that should be located at that address. All computers and systems on the Internet use addresses that look similar to:

See our DNS video tutorials... they make setting up your nameservers super easy! 

Note: in order to change or set up your nameservers your registrar lock has to be unlocked. See here for more info.


See 1&1's detailed instructions here:


If you registered your domain through HostNine, you'll need to login to the Customer Area at Then:

  1. Click My Domains
  2. Click Manage Domain, next to the domain in question
  3. Click the Registrar Lock tab and then click the Disable Registrar Lock button
  4. Click the Management Tools tab
  5. Click Register Nameservers from the available options
  6. Enter your nameserver, '' and the IP address
  7. Click the Save Changes button
  8. Repeat for '' and click the Save Changes button
  9. ​Click the Nameservers tab
  10. Enter your nameservers in the Nameservers text fields
  11. Click the blue Change Nameservers button to save your changes
  12. ​Navigate back to the Registrar Lock tab and reenable it via the Enable Registrar Lock button


See DirectNIC's detailed instructions here:


See DomainSite's detailed instructions here:


See Enom's detailed instructions here:

​Scroll down towards the bottom of the page. In the 'Can I have my nameservers registered?' section, note that Register DNS option can be found by navigating to Domains, then Advanced Settings, and finally Register a Name Server.


See GoDaddy's detailed instructions here:​.


(Also applies to Dotster)

See MyDomain's detailed instructions here:​.


See Namecheap's detailed instructions here:

Network Solutions

See Network Solutions detailed instructions here:


See OpenSRS's detailed instructions here:

See's detailed instructions here: Information/How_Do_I_Change_My_DNSSettings.htm?Highlight=add nameserver​.


See Weebly's detailed instructions here:

  1. Log in to your Account Manager

  2. Next to Domains, click Launch

  3. Click the domain name you want to use to register as your own nameserver

  4. In the Settings tab, click Manage next to Hostnames

  5. Click Add Hostname

  6. Enter the hostname you want to register

  7. Enter the two unique IP addresses you want to add to the host (nameservers need to be set to the IP address you've set up for your domain)

  8. Click Add

(2 vote(s))
This article was helpful
This article was not helpful

Comments (0)
Post a new comment
Full Name:
Help Desk Software by Kayako fusion